Аппарат сварочный Fujikura FSM-19S+, KIT-A (FSM-19S+BTR-09+DCC-18+СТ-50)

-----Аппарат сварочный Fujikura FSM-19S+, KIT-A (FSM-19S+BTR-09+DCC-18+СТ-50)

Цена на товар:

Под заказ

Узнать цену

FSM-19S+ - новинка от японского бренда Fujikura с фиксированным V-образным пазом. Данный аппарат обладает рядом преимуществ – наличие модуля Bluetooth для связи со скалывателем, отличную скорость сварки и нагревания термоусадочной трубки – 9 секунд.

Для сварки доступно 100 программ, и 30 программ для нагрева трубки.

Разница между Kit-A и Kit-C заключается только в скалывателях.

Applicable bers	Single / SMF(G.652/657), MMF(G.651), DSF(G.653), NZDSF(G.655)
Cladding dia. / Sheath dia.	125μm / 100-3000μm
Cleave length	5mm to 16mm by sheath clamp
Splice mode / heating mode	Total 100 splice modes / 30 heating modes
Typical splice loss	0.05dB (SM), 0.02dB(MM), 0.08dB(DS) and 0.08dB(NZDS)
Return loss	>>60dB
Typical splice time	9sec SM FAST 11sec SM AUTO
Typical tube heating time	13sec FP-03,coating dia.250μm 14sec FP-03,coating dia.900μm 9sec Slim 60mm,coating dia.250μm
Splice result storage	Last 2000 splices
Viewing methods / magni cation	2 axis CMOS camera with 4.73” color LCD. X / Y (320X magni cation), or both X and Y simultaneously (200X magni cation)
Tension test	1.96 to 2.25N
Applicable protection sleeve	60mm, 40mm and Fujikura micro sleeves
No. of splice / heating per battery full charge	Typical 180 cycles with BTR-09
Electrode life Wireless connectivity	Typical 3000 splices Wireless technical standard: BluetoothⓇ 4.1*³ OS: Andoroid 5.0 or above , ios 8.0 or above(iphone6 above)
Size / weight	146W x 159D x 150H (mm) / 2.5kg (including battery)
Operating condition	Altitude : 0 to 5,000m above sea level, Wind : 15m/sec*4 Temperature : -10 to 50deg C, Humidity : 0 to 95%RH, non-dew
Resistance features	Shock : 76cm (30inch) all surface drop Dust : Exposure to dust (0.1 to 500μm dia Alumina Silicate), IP5X Rain : H=10mm/hr for 10min, IPX2
Other features	PC software upgrade / data management
Terminals	USB 2.0 (Mini-B type) connector for PC communication. 6-pin Mini-DIN connector for RS02 or RS03 power supply.

Applicable bers	Single / SMF(G.652/657), MMF(G.651), DSF(G.653), NZDSF(G.655)
Cladding dia. / Sheath dia.	125μm / 100-3000μm
Cleave length	5mm to 16mm by sheath clamp
Splice mode / heating mode	Total 100 splice modes / 30 heating modes
Typical splice loss	0.05dB (SM), 0.02dB(MM), 0.08dB(DS) and 0.08dB(NZDS)
Return loss	>>60dB
Typical splice time	9sec SM FAST 11sec SM AUTO
Typical tube heating time	13sec FP-03,coating dia.250μm 14sec FP-03,coating dia.900μm 9sec Slim 60mm,coating dia.250μm
Splice result storage	Last 2000 splices
Viewing methods / magni cation	2 axis CMOS camera with 4.73” color LCD. X / Y (320X magni cation), or both X and Y simultaneously (200X magni cation)
Tension test	1.96 to 2.25N
Applicable protection sleeve	60mm, 40mm and Fujikura micro sleeves
No. of splice / heating per battery full charge	Typical 180 cycles with BTR-09
Electrode life Wireless connectivity	Typical 3000 splices Wireless technical standard: BluetoothⓇ 4.1*³ OS: Andoroid 5.0 or above , ios 8.0 or above(iphone6 above)
Size / weight	146W x 159D x 150H (mm) / 2.5kg (including battery)
Operating condition	Altitude : 0 to 5,000m above sea level, Wind : 15m/sec*4 Temperature : -10 to 50deg C, Humidity : 0 to 95%RH, non-dew
Resistance features	Shock : 76cm (30inch) all surface drop Dust : Exposure to dust (0.1 to 500μm dia Alumina Silicate), IP5X Rain : H=10mm/hr for 10min, IPX2
Other features	PC software upgrade / data management
Terminals	USB 2.0 (Mini-B type) connector for PC communication. 6-pin Mini-DIN connector for RS02 or RS03 power supply.